Using the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box)
If you have a
To use your TV remote control to operate a:
¥cable converter box or satellite receiver, set the Device Switch to CBL/SAT.
¥VCR, set the Device Switch to VCR.
¥DVD player or HTIB, set the Device Switch to DVD.
Using the Remote Control
Note:
¥Even after the TV remote control is programmed, it may not operate certain features on your other device. If this happens and you wish to use those features, you will need to use the deviceÕs original remote control.
¥This illustration describes typical external device functions (not TV functions). The buttons on this remote control may or may not work as described for your specific device.
Point the remote control
directly at the device.
RECALL
DVD DISPLAY function.
POWER
Turns the selected device on and off.
+10 / 100 Accesses DVD chapters higher than 10, or VCR channels higher than 100.
TOP MENU (SLEEP)
Accesses a DVDÕs top menu.
DVD MENU
Accesses a DVDÕs menu system.
ENTER
DVD ENTER function.
Device Switch
Set to TV to control the TV; CBL/SAT to control a cable converter box or satellite receiver; VCR to control a VCR; DVD to control a DVD player or HTIB.
TV/VCR
To view one program while recording another, press to select TV mode.
REW Rewinds the tape or DVD. (Press during playback to view the picture moving rapidly backward.)
REC
Starts recording.
FF
}
}
Channel Numbers
Press to directly access channels (as opposed to CH st).
ENT
Required by some VCRs and cable converter boxes to change the channel.
stT S
Navigate DVD menus.
CLEAR
DVD CLEAR function.
CH st
s selects the next higher channel; t selects the next lower channel.
PAUSE
Press during playback or recording to pause the picture; press again to restart.
PLAY
Begins playback of a tape or DVD.
STOP
Stops the tape or DVD.
SKIP/SEARCH SS
Skips forward to beginning of next DVD chapter.
SKIP/SEARCH TT
Skips back to beginning of current DVD chapter or previous chapters.
14
