3.Press y or z to highlight TV/CABLE.
4.Press x or • to highlight TV (if you use an antenna) or CABLE (if you use cable).
5.Press z to highlight CH PROGRAM.
SET UP |
|
|
|
| SET UP |
|
|
|
LANGUAGE: |
|
|
| LANGUAGE: |
|
| ||
| [ENGLISH] FRANCAIS ESPANOL |
|
| [ENGLISH] FRANCAIS ESPANOL | ||||
TV/CABLE: | [TV] CABLE |
| TV/CABLE: | [TV] CABLE | ||||
CH PROGRAM |
|
|
| CH PROGRAM |
|
| ||
ADD/ERASE: | [ADD] ERASE |
| ADD/ERASE: | [ADD] ERASE | ||||
|
|
| ||||||
MORE |
|
|
|
| MORE |
|
|
|
MOVE [ | ] | SELECT [ | ] |
| MOVE [ | ] | SELECT [ | ] |
6.Press x or • to start automatic channel programming
(“CH PROGRAM” displays
7.When automatic channel programming is complete, the message “CH Programming Completed” appears.
8.Press CHANNEL ▲▼ to view the programmed channels.
Adding and erasing channels manually
After you have automatically programmed the channels into the TV’s memory, you can manually add and erase individual channels.
To add or erase a channel in the TV’s memory:
1.Tune the TV to the channel you want to add or erase. If you are adding a channel, you will need to use the CHANNEL NUMBERS to select the channel.
2.Press MENU.
3.Press x or • to highlight the SET UP menu.
4.Press y or z to highlight ADD/ERASE.
SET UP
LANGUAGE: |
|
| |
| [ENGLISH] FRANCAIS ESPANOL | ||
TV/CABLE: | [TV] CABLE | ||
CH PROGRAM |
|
| |
ADD/ERASE: | [ADD] ERASE | ||
| |||
MORE |
|
|
|
MOVE [ | ] | SELECT [ | ] |
5.Press x or • to highlight ADD or ERASE, whichever function you want to perform.
6.Press MENU.
7.Repeat steps
Changing channels
To change to the next programmed channel:
Press CHANNEL yz.
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS
Note: For channels 100 and higher, press the 100 button, and then the next two channel numbers (for example, to select channel 100, press 100 - 0 - 0; to select channel 125, press 100 - 2 - 5).
}Channel
Numbers
MENU
}stTS
EXIT
Channel yz
Introduction Connecting your TV
Using the Remote Control
Setting up your TV
Using the TVÕs Features
Appendix
17