Toshiba 32AF45 appendix Adding channels to the TV’s memory, Changing channels, Setting up your TV

ADJUST

SELECT

Setting up your TV

Adding channels to the TV’s memory

When you press CH +/- on the remote control or CHANNEL ▲/▼ on the TV front panel, your TV will stop only on the channels stored in the TV’s channel memory. Follow the steps below to program channels into the memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase specific channels manually.

To add channels automatically:

1.Press MENU, then press or to display the SETUP menu.

2.Press ▲ or ▼ until the TV/CABLE selection is highlighted.

3. Press or to highlight either		CH
	PICTURE AUDIO	SETUP OPTION
TV or CABLE, depending on
			TV
which you use.	TV / CABLE			CABLE
	CH PROGRAM		START
If you use an antenna, choose TV.	ADD / ERASE		ADD
If you use cable, choose CABLE.	SELECT		ADJUST

4.Press ▼ to select CH PROGRAM.

5.Press or to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.

While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

6.When channel programming is complete, the message “COMPLETED” appears.

7.Press CH + or – to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.Select the channel you want to add or erase.

If you are adding a channel, you must select the channel using the

	Channel Number buttons.
2.	Press MENU, then press or
				CH
	to display the SETUP menu.
		PICTURE	AUDIO	SETUP		OPTION
3.	Press ▲ or ▼ to highlight ADD/	TV / CABLE			CABLE
	ERASE.
		CH PROGRAM			START
4.	Press or to select ADD or
							ERASE
		ADD / ERASE			ADD

ERASE, whichever function you want to perform.

5.Repeat steps 1–4 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:

Press CHANNEL ▲/▼ on the TV front panel or CH +/– on the remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100) on the remote control.

For example, to select channel 125, press 100, 2, 5.

16

POWER	TV	VCR	CABLE
			DVD
1	2	3
			+10
4	5	6	100	Channel
7	8	9	0	Numbers
	CH +			Channel +/–
VOL	MENU/		VOL
–			+
	ENTER
				Menu
	CH –
EXIT	RECALL	TV/VIDEO	FAV
VOL		CH RTN	FAV
RESET	CAP/TEXT	1/2	16:9
DISPLAY	DVD CLEAR	TOP MENU	DVD MENU
CODE	MTS	SLEEP	MUTE

J3S90121A(E)_P07-16 16 9/03/2005, 5:57 PM