13
Introduction / Getting started
3 PressQtodisplaytheAuto Tuningmenu.
Auto Tuning
Previous settings will be Lost!
Press EXIT for no change.
Press OK key to start auto tune.
4 PressQtostarttheautomaticsearch.
Thesearchwillbeginforallavailablestations.
5 Whentheautomaticsearchiscompleted,
theTVwillautomaticallyappeartheManual
Tuningmenu.
6 ClosingtheAuto Tuningmenu,pressEXIT.
Note:
Whenyoupresetthechannelwhichsound
of broadcast transmission system adopts “M”
system, the sound system may not be tuned
correctlyiftheradiowavestransmitbadly.Atthat
time, preset the channel by Manual Tuning.
ThecountriessuchasMyanmar,Brazil,Chile,
Colombiaapplytothiscase.Seepage31for
more details.

Manual Tuning

1 FromtheSETUP menu,presssorrto
selectManual Tuning.
2 PressQtodisplaytheManual Tuning
menu.
Presssorrtoselecttheprogramme
positionyouwanttoarrange.
3 PressQtodisplaythebreakdownmenu.
Pressv orwtoselectanitem,thenpresss
orrtoselecttheitemasshownbelow.
Manual Tuning
Position
0
1B/G A 0
On

A C E G

H

FDB

A. Position selection
B. System (Sound) (- page 31)
C. Colour System (- page 31)
A:Automatic(factoryset),P:PAL,
S:SECAM,4:NTSC4.43(MHz),
3:NTSC3.58(MHz)
 Ifthecolourofacertainchannelis
abnormal,theautomaticcoloursystem
selection(A)mayhavemalfunctioned,or
soundsystemselectioniswrong.Insuch
acase,selectanothercolourand/orsound
system(-page31).
D. Position skip selection
 Presssorrtoturnthepositionskip
optionon“8”oroff“(”.
 Thepositionwillthenbeskippedwhenyou
selectchannelswithPUorPu.
 The“8”markwillappearbesidea
positionnumberwhenyouusethe
Numberbuttonontheremotecontrol.
E. Channel search operation
 Pressrtosearchupthebandorsto
searchdowntheband.
 Presssorrrepeatedlyuntilyourdesired
channelisdisplayed.
 Whenastationisfound,itwillbe
displayed.
 NEVERPRESSANYOTHERBUTTONS
WHILETHESETISTUNING.
F. Manual Fine Tuning
 Presssorruntilbetterpictureand
soundareobtained.
G. Signal Booster
 Ifthereceivingsignalisweak/strongand
thepictureisnoisy,thepicture maybe
improvedwhenusingthisfunction.
 PressthesorrtoturntheSignal
BoosterOnorOff.
H. Label
 Stationlabelsappearunderthe
programmepositiondisplayeachtimeyou
turnontheTV,selectachannel,orpress
.
To change or create station labels:
1)Presssorrrepeatedlytoselecta
characterfortherstspace,thenpress
v orw.
*(blank space)
2)Repeatstep1)toentertherestofthe
characters.Ifyouwouldlikeablank
spaceinthelabelname,youmust
chooseablankspacefromthelistof
characters.
PressQtostoreyoursettings.

Setting the Location

YoucanselecteitherHomeorStoremode.
Homeisrecommendedfornormalhomeuse.
SelectStorewhenusingaTVfordisplayingina
shop,etc.
1 FromtheSETUP menu,presssorrto
selectLocation.
2 Pressv orwtoselectHomeorStore.