47
Chapter 6: Basic features
Controlling HDMI® CEC playback devices
With your TV’s remote control, you can control the
connected HDMI® CEC playback device (DVD player,
etc.) you are watching.
Available remote control key functions:
Before using these key functions, set the MODE
SELECT switch on the remote control to TV.
Note: These functions depend on the connected devices.
HDMI® CEC Player Control menu functions:
1Press to open the Quick menu.
2Select HDMI-CEC Player Control. Press .
3Press B or b to select the item you want to control
and press .
Note:
These functions depend on the connected devices.
The HDMI-CEC Player Control item is not available under
these conditions:
-A non-HDMI input is selected.
-The Enable HDMI-CEC Control item is set to Off.
-The connected HDMI® CEC device is not a playback or
recording device.
HDMI® CEC Control input source selection
If an HDMI® CEC device with HDMI switching
capability (e.g. an amplifier) is connected to the HDMI
input, you can select another HDMI® CEC device that is
connected to the master HDMI device.
Use on the remote control or the control panel (-
p. 41).
Button Description
Begins playback.
Stops playback.
Pauses the picture during play or record
mode.
Skips forward.
Skips backward.
Fast-forwards.
Rewinds/reverses.
B b C cNavigates contents menu, etc.
Enters contents menu, etc.
Closes the menu.
RED,
GREEN,
YELLOW,
BLUE
Controls various operations
OK
Item Description
Power Turns the selected device on and off.
Root Menu Accesses the selected device’s top menu.
Contents
Menu
Accesses the contents list when you press
.
Setup Menu Accesses the device’s setup menu.
OK
OK
OK