yz, SOURCE,

Changing the location of the PIP window

With the TV in PIP mode, press LOCATE to change the location of the PIP window on-screen. Every time you press LOCATE, the PIP window changes position counter-clockwise.

INFO

CHANNEL y/z

Welcome to Toshiba

Connecting your TV

Freezing the PIP display

With the TV in PIP mode, press STILL to freeze the PIP display. The PIP picture becomes still and is outlined in red on-screen. Press STILL again to restore the moving picture (outlined in green).

Still

AM/FM

DISC

PIP

SWAP

LOCATE

SOURCE STILL

PIP Channel y/z

Using the Remote Control

Watching multi-window PIP

Multi-window PIP appears as six small boxes across the bottom of the screen. The multi-window PIP displays only the channels you programmed into the TV’s memory (see “Adding channels to the TV’s memory” on page 24).

Note: The LOCATE, SWAP, PIP CHANNEL

and STILL buttons do not function in multi-window PIP mode.

To view multi-window PIP:

Press INFO.

The TV cycles through all of the programmed channels, showing a few seconds of each channel’s programming, and then freezes the image and moves on to the next channel in a continuous cycle. The channel number appears above each small PIP window.

Note:

Multi-window PIP displays channels programmed for the signal source you are currently viewing (ANT-1 or Cable). See “Adding channels to the TV’s memory” on page 24.

If V-Chip blocking is enabled when you view multi-window PIP, the channels exceeding the rating limits will appear as a black window with a red “X.”

Setting up your TV

Using the TV’s Features

14 23 27 30 43 56

To turn multi-window PIP off:

Press INFO again or change the channel.

Appendix

Index

37