Toshiba 37AV502U, 26AV502U owner manual Using Mpeg noise reduction, Using the Game Mode feature

Chapter 7: Using the TV’s advanced features

Using CableClear® digital noise reduction

The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc.

To change the CableClear settings:

1� Press and open the Video menu, highlight Noise Reduction and press .

� In the CableClear field, select your desired setting.

Note:

•If the current input is ANT/CABLE, VIDEO 1, or VIDEO 2, the menu will display the text “CableClear.” The available selections are Off, Low, Middle, and High.

•If the current input is ColorStream HD1, ColorStream HD2, HDMI 1, or HDMI 2, the menu will display the text “DNR.” The available selections are Off, Low, Middle, and High. Low, Middle, and High will reduce

the noise in varying degrees, from lowest to highest, respectively.

� To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press .

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled (“grayed out”).

To select the MPEG noise reduction level:

1� Press and open the Video menu.

� Highlight Noise Reduction and press .

� Press  or  to highlight the MPEG Noise Reduction field, and then press  or  to select either Off, Low, Middle or High.

� To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press .

Using the Game Mode feature

You can use the Game Mode feature for shorter frame delays when playing a video game requiring split-second timing between the on-screen display and input from the controller (such as music creation and high-action games).

This feature is more effective for 480i and 1080i input signals.

Note: To use the Game Mode feature, the current video input must be Video 1, Video 2, ColorStream HD1, ColorStream HD2, HDMI 1, or HDMI 2. The Game Mode cannot be turned on when any other video input is selected.

To turn on Game Mode:

1� Press and open the Video menu.

� Press  or  to highlight the Game Mode and then press .

� Press  or  to select On and then press .

To turn off Game Mode:

Select Off in step 2 above, change the video input, or turn the TV off and then on again.

Note: You can change the video input by pressing on the remote control ( page 34).

52