6
CHANNEL MAPPING
1 BBC1
2 BBC2
PRESS : / /
RENAME
/
MOVE/MENU/EXIT
3 ITV
4 CH4
5 CH5
6SAT1
7
8
9
10
11
12
13
14
15
How to tune in television stations
Your television has an Automatic Tuning
System which makes tuning in your
television easy. This Automatic Tuning
System scans the entire reception range
in your area and automatically stores all
available channels of suitable signal
strength in the correct order e.g. BBC1
will tune into channel 1, BBC2 will tune
into channel 2, etc.
Before you can view a television station it must be stored in your
television memory, this section will show you how to achieve this. You
cannot tune TV channels if the aerial is not connected to the aerial
socket of your television.
1Make sure that your TV is properly installed.
Press (main power) switch on the front panel, the red
standby indicator will light.
Switch on your television by pressing (standby) on the remote
control.
If you have a VCR connected make sure that it is switched
on and it's test pattern is switched on or a video is playing . . .
you will be unable to see anything at the moment!
2
NOTES:
•ONLY WHEN YOU TURN ON THIS SET
FOR THE FIRST TIME, THE AUTOMATIC
TUNING PROCESS WILL START
AUTOMATICALLY.
•Please refer to your Satellite instruction
book to see how to select Sky One.
If you have a Satellite system
connected make sure that it is
switched on and you have
selected Sky One. . . you will
be unable to see anything at
the moment!
Press OK on your remote
control!
Your TV will now automatically
tune in all available channels.
AUTOMATIC TUNING
3When the programme on the
screen stops changing and the
sound comes on, the tuning
process is complete.
Press EXIT to clear the
CHANNEL MAPPING menu
display.
Your TV is now tuned in and ready to watch...
If you wish to change the order that the stations are
stored in, refer to the Channel Mapping section in this
book.
3N70401A/P01-07 7/4/03, 5:15 PM6