44
HL196 (E/F) Web 213:276
Chapter 5: Using the TV’s features
Using the StableSound® feature
The StableSound® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).

To turn on the StableSound® feature:

1Press Y and open the Audio menu.
2Highlight Audio Settings and press T.
3In the StableSound field, select On.
4To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: The RESET function returns your audio adjustments
to the following factory settings:
Bass . . . . . . . . . center (50)
Treble. . . . . . . . center (50)
Balance . . . . . . center (0)
StableSound. . . Off

To turn off the StableSound feature:

Select Off in step 3 above.
Selecting the optical audio output format
You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the Optical Audio Out terminal on
the TV (- “Connecting a digital audio system” in the
Installation Guide).

To select the optical audio output format:

1Press Y and open the Audio menu.
2Highlight Audio Setup and press T.
3In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device.
4To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Done
Audio Settings
Bass 100
Treble
Reset
100
0
Balance
StableSound On
Done
Audio Setup
MTS
Language
Optical Output Format
Dolby Digital
Reset
Stereo
English
HL196_EN.book Page 44 Friday, June 2, 2006 2:35 PM