54
HL196 (E/F) Web 213:276
Chapter 6: Using the TV’s advanced features
Using MPEG noise reductionThe MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High.
Off is automatically selected when this feature is disabled
(“grayed out”).
To select the MPEG noise reduction level:
1Press Y and open the Video menu.
2Highlight Advanced Picture Settings and press T.
3Press B or b to highlight the MPEG Noise Reduction
field, and then press C or c to select either Off, Low,
Middle or High.
4To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Selecting the color temperatureYou can change the quality of the picture by selecting from
three preset color temperatures (cool, medium, and warm), as
described below.
To select the color temperature:
1Press Y and open the Video menu.
2Highlight Advanced Picture Settings and press T.
3In the Color Temperature field, select the mode you
prefer (Cool, Medium, or Warm).
4To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference in the Picture Settings menu.
DoneReset
Cool
Game Mode Off
Color Temperature
Low
MPEG Noise Reduction
Dynamic Contrast On
ANT 1Advanced Picture Settings
CableClear Auto
Mode Picture Quality
cool blueish
medium neutral
warm reddish
DoneReset
Cool
Game Mode Off
Color Temperature
Low
MPEG Noise Reduction
Dynamic Contrast On
ANT 1Advanced Picture Settings
CableClear Auto
HL196_EN.book Page 54 Friday, June 2, 2006 2:35 PM