Setting up your TV
Adding channels to the TV’s memory
When you press CH 
or 
, your TV will stop only on the channels you have programmed into the TV’s channel memory. Follow the steps below to program channels into the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase channels manually.
To add channels automatically:
1.Press TV to select the TV mode.
2.Press MENU, then press 
or 
to displaythe SETUP menu.
3.Press ▲ or ▼ until the TV/CABLE
selection is highlighted. 
4.Press 
or 
to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE. 
5.Press ▼ until the CH PROGRAM selection is highlighted.
6.Press 
or 
to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message “PROGRAMMING NOW PLEASE WAIT” appears.
7.When channel programming is complete, the message “COMPLETED” appears.
8.Press CH 
or 
to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or erase specific channels manually.
To add or erase channels manually: |
|
|
|
|
|
| ||
1. | Press TV to select the TV mode. |
|
|
|
|
|
|
|
2. | Select the channel you want to add or erase. |
|
|
|
| |||
| If you are adding a channel, you must select the channel using the | |||||||
| Channel Number buttons. |
|
|
|
|
|
|
|
3. | Press MENU, then press or | to display the SETUP menu. | ||||||
4. | Press ▲ or ▼ to highlight ADD/ |
|
|
|
|
|
|
|
| ERASE. |
|
|
|
|
|
|
|
5. | Press or to select either ADD |
|
| |||||
| or ERASE. |
|
|
| ||||
6. | Repeat steps |
|
|
| ||||
7. | nels you want to add or erase. |
|
|
|
|
| ||
|
|
|
| |||||
|
|
|
| |||||
Press EXIT to return to the normal |
|
|
|
|
|
| ||
screen.
Changing channels
To change to the next programmed channel:
Press Channel ▲ / ▼ on the TV or CH 
/
on the remote control.
To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons
INPUT DISPLAY
Channel
Numbers
TV
Channel 
/
Menu/Enter
Exit
In addition to cycling through your pro- grammed channels, the Channel 
or 
buttons will also cycle through the video input sources (page 30) in the order illustrated below.
| |||||
Note:
If the remote control does not operate your TV, press the “TV” button on the remote control and try again.
24
24 | 5/26/06, 6:25 PM |
