Manuals / Lexmark / Computer Equipment / Printer

Lexmark S510-2222-00 setup guide Unpack the firmware card, Install memory and option cards

Models: S510-2222-00

1 94

Download 94 pages 38.07 Kb

Page 37

2 Unpack the firmware card.

Warning! Firmware cards are easily damaged by static electricity. Touch something metal such as the printer frame before you touch a card.

Alignment pins

System board holes

2 Unpack the firmware card.

Avoid touching the metal pins on the bottom of the card. Save the packaging.

3 Holding the card by its sides, align the pins on the card with the holes on the system board.

4 Push the firmware card firmly into place.

The entire length of the connector on the firmware card must touch the system board.

Be careful not to damage the connectors.

Install memory and option cards

29

Image 37

Lexmark S510-2222-00 setup guide Unpack the firmware card, Install memory and option cards

Contents

Infoprint Color Setup GuidePage Infoprint Color Setup GuideEdition October Safety informationFCC emissions information ConventionsTable of contents Opening the top cover About your printer IntroductionPublications CD Other sources of informationSetup Guide Publications CD Step 1 Unpack your printerQuick Reference and sleeve Unpack your printer2 Unpack your printer Step 2 Select a location for your printer Considering environmental issuesSelect a location for your printer 734.9 mm 29 in 102 mm 5 in.152.1 mm 6 in 4 Select a location for your printer1241.8 mm 508 mmSelect a location for your printer Network and internet printers869.2 mm 34.3 in 102 mm 5 in.152.1 mm 6 in 1241.8 mm869.2 mm 34.3 in 102 mm 5 in.329.5 mm 13 in 6 Select a location for your printer1241.8 mm 56 inSelect a location for your printer Printer with high-capacityfeederTopic 8 Set up the printer and paper handling optionsGo to page Set up the printer and paper handling options Installing the printer base or cabinet10 Set up the printer and paper handling options Installing a 550-sheetdrawerSet up the printer and paper handling options Positioning the printer12 Set up the printer and paper handling options Installing an optional duplex unit5 Slide in the duplex unit Set up the printer and paper handling optionsTighten the thumbscrews 14 Set up the printer and paper handling optionsClose the duplex unit door Set up the printer and paper handling options Installing an optional high-capacityfeederAttaching the docking frame 16 Set up the printer and paper handling options3 Use the wrench to tighten the screws Set up the printer and paper handling optionsAttaching the guide rail and feeder 18 Set up the printer and paper handling optionsSet up the printer and paper handling options 4 Roll the high-capacityfeeder toward the printer and check the alignment of the pins with the holes in the docking frame20 Set up the printer and paper handling options Set up the printer and paper handling options Installing height adjustment spacersAdd or remove spacers To add spacers 22 Set up the printer and paper handling optionsSet up the printer and paper handling options Attaching the paper tray labelsRemoving the system board access cover Step 4 Install memory and option cards24 Install memory and option cards 2 Slide the cover up and away from the printer Install memory and option cardsTo install a 26 Install memory and option cards4 Use the following table to locate the instructions you needInstall memory and option cards Installing a memory card28 Install memory and option cards Installing a firmware card2 Unpack the firmware card Install memory and option cards30 Install memory and option cards Installing a hard diskInstall memory and option cards Installing an option cardCard Function32 Install memory and option cards 1 Remove the system board access cover see pageInstall memory and option cards 4 Align the connector on the option card with the connector on the system board34 Install memory and option cards Reinstalling the system board access coverAttach cables Step 5: Attach cables36 Attach cables Attach cables Local printing38 Install printer supplies Step 6 Install printer suppliesTo open the top cover 2 Open the front door3 Rotate the top cover locking lever to the left Install printer supplies5 Lift the top cover until it stops 40 Install printer suppliesInstall printer supplies Installing the photodevelopersTransfer belt 4 Remove the tape from the photodeveloper 42 Install printer supplies6 While holding the photodeveloper with your left hand and the photodeveloper cover with your right hand, slide the photodeveloper in until the unit is fully seated Install printer supplies44 Install printer supplies Installing the toner cartridgesColored label Install printer supplies46 Install printer supplies Install printer supplies Attaching the Quick Reference booklet sleeve48 Install printer supplies Attaching an adhesive operator panel overlayInstall printer supplies Closing the top coverPlace both hands on the top cover as shown3 Rotate the top cover locking lever to the right 50 Install printer suppliesbLift the top cover 4 Close the front doorLoad paper Step 7 Load paperGo to Source52 Load paper Loading the paper trays2 Press the metal plate down until it locks 1 Pull the paper tray out until it stopsLoad paper 54 Load paper 4 Release the paper guideLoad paper 6 Place the paper in the tray, print side down56 Load paper 9 Push the tray completely in the printerSet the paper size Using the heavy media trayPAPER MENU PAPER SIZE Load paperPAPER MENU PAPER TYPE Set the paper typePAPER MENU PAPER TYPE 58 Load paperLoad paper Loading the multipurpose feeder60 Load paper Load paper Note Do not exceed the maximum stack height. Overfilling the feeder may cause jams62 Load paper The multipurpose tray can be closed by lifting itLoad paper Loading the high- capacity feeder64 Load paper Load paper Note Do not exceed the maximum stack height. Overfilling the tray may cause paper jams66 Load paper 8 Press the Paper Tray buttonTurning on the printer Step 8 Verify printer setupVerify printer setup 68 Verify printer setup Printing a menu settings pageUTILITIES MENU Verify printer setup Printing a network setup pageWhat do I do next? UTILITIES MENUSetting the printer IP address Step 9 Configure for TCP/IP70 Configure for TCP/IP Configuring for Pull Printing Verifying the IP settingsConfigure for TCP/IP Network printing Step 10 Install printer drivers72 Install printer drivers WindowsInstall printer drivers Creating ports and installing driversMacintosh Supported printer drivers74 Install printer drivers Installation instructionsLocal printing Other network environmentsInstall printer drivers Macintosh You must install the printer’s PPD and use it with the LaserWriter 8 printer driver or the Adobe PostScript driverPage Identifying printer users Step 11 Distribute information to usersFinding information Distribute information to usersCongratulations Distributing the information Storing the QuickReference 78 Distribute information to usersIndex Index80 Index Index Page Readers’ Comments - We’d Like to Hear from You Infoprint Color Setup GuidePublication No. S510-2222-00 Please tell us how we can improve this bookReaders’ Comments - We’d Like to Hear from You BUSINESS REPLY MAILPage S510-2222-00 Part Number 53P71141P P/N 53P7114