Lexmark S510-2222-00 setup guide Installing height adjustment spacers

Installing height adjustment spacers

8 Insert the point on the cable holder into the hole on the back of the top optional drawer.

9 Place the high-capacity feeder cable into the holder.

10 Close the cable holder.

If the pins on the high-capacity feeder did not align with the holes in the docking frame you can adjust the height of the feeder.

You can either remove the factory installed spacer or add two spacers between each caster and the bottom of the high-capacity feeder.

Use the following steps to add or remove spacers.

1 Determine the height difference between high-capacity feeder alignment pins and the docking frame.

Set up the printer and paper handling options 21