Printing a network setup page
Note: If an optional MarkNet card is installed in slot 1, you see Print Net1 Setup on the display.
UTILITIES MENU
1 Menu 2 | Select 3 | Return 4 |
| Go 5 | Stop 6 |
If the printer is attached to a network, print a network setup page to verify the network connection. This page also provides important information that helps you configure for network printing.
1 Press Menu until you see Utilities Menu, and then press Select.
2 Press Menu until you see Print Net Setup, and then press Select. The network setup page prints and the printer returns to Ready status.
3 Check the first section on the network setup page and confirm that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may not be active or your network cable may be malfunctioning. Consult your network support person, and then print another network setup page to verify that you are connected to your network.
Save the network setup page for later use.
What do I do next?
Task | Go to page… |
Configure for TCP/IP | 70 |
|
|
Install printer drivers | 72 |
|
|
Verify printer setup 69
