36
LX196 (E/F) Web 213:276
Chapter 5: Using the TV’s features

TheaterWide 3 picture size (for letter box programs

with subtitles)

The picture is stretched wider to fill the width of the screen,
but only slightly stretched taller.
The top and bottom edges are hidden. To view the hidden
areas (such as subtitles or captions), see “Scrolling the
TheaterWide® picture” at right.

Full picture size (for 16:9 [480i, 480p] source

programs only)

If receiving a squeezed 4:3 format program, the picture is
stretched wider to fill the width of the screen, but not
stretched taller.
None of the picture is hidden.

Native picture size (for 1080i signal programs)

If receiving a 1080i signal program, the Native mode
displays the entire picture without scaling.
Note: Native picture size is available for 1080i signals only. If
the signal being received is other than 1080i, “Native” will be
grayed out in the Picture Size screen.
Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1Press Y and open the Video menu.
2Highlight Theater Settings and press T.
3In the Picture Size field, select either TheaterWide 2
or TheaterWide 3 (you cannot scroll in any other mode).
4Press b to highlight the Picture Scroll field.
5Press C or c to scroll the picture up and down as needed,
from –10 to +20.
6To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
A B C D E F G - - - - - - - - - - - - - - - -
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
TheaterWide 3 picture size example
Full picture size example
Native picture size example
CH RTNENTER
EXIT
Navigate Select Back Exit
Picture Settings
Advanced Picture Settings
Theater Settings
Video
DoneReset
Theater Settings
Picture Size TheaterWide 2
Picture Scroll -5
Cinema Mode Film
Auto Aspect Ratio On
LX196_EN.book Page 36 Friday, June 23, 2006 5:06 PM