Toshiba 42LX196 manual Using the StableSound feature, Selecting the optical audio output format

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

To turn on the built-in speakers: Select On in step 3 above.

44

Reset

Done

Optical Output Format

Dolby Digital

Speakers

Off

Language

Stereo

English

Audio Setup

MTS

Turning off the built-in speakers

You can use this feature to turn off the TV speakers when you connect an audio system to your TV (- “Connecting a digital audio system” and “Connecting an analog audio system” in the Installation Guide).

To turn off the built-in speakers:

1 Press Yand open the Audio menu.

2 Highlight Audio Setup and press T.

3 In the Speakers field, select Off.

in step 3 above.

Select Off

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note: The RESET function returns your audio adjustments to the following factory settings:

Bass . . . . . . . . . center (50) Treble. . . . . . . . center (50) Balance . . . . . . center (0) StableSound. . . Off

To turn off the StableSound feature:

Reset

Done

StableSound

On

0

Balance

100

Bass

Treble

100

Audio Settings

Chapter 5: Using the TV’s features

Using the StableSound® feature

The StableSound® feature limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial).

To turn on the StableSound® feature:

1 Press Yand open the Audio menu.

2 Highlight Audio Settings and press T.

3 In the StableSound field, select On.

Selecting the optical audio output format

You can use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the Optical Audio Out terminal on the TV (- “Connecting a digital audio system” in the Installation Guide).

To select the optical audio output format:

1 Press Yand open the Audio menu.

2 Highlight Audio Setup and press T.

3 In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device.

Audio Setup

MTS	Stereo
Language	English
Speakers	On
Optical Output Format	Dolby Digital

ResetDone

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.