Toshiba 40RV525U, 46RV525U, 40RV52U owner manual Using the PC settings feature, Using the GameTimer

Chapter 6: Using the TV’s features

Using the GameTimer®

You can use the GameTimer to set a time limit for playing a video game (30–120 minutes). When the GameTimer expires, the TV enters Input Lock mode and locks out the input source for the video game device..

To set the GameTimer®:

1 From the Locks menu, press T to display the PIN code entering screen.

2 Enter your four-digit PIN code and press .

3 Press T to highlight GameTimer and press X.

4 Press S or T to select the length of time until the Input Lock is activated (30, 60, 90, or 120 minutes) and press

.

To cancel the GameTimer®:

Select Off in step 4 above.

To deactivate the Input Lock once the GameTimer® has activated it:

Set the Input Lock to Off ( “Using the input lock feature” as described above).

Note:

•A message will appear when 10 minutes, 3 minutes, and 1 minute remain on the GameTimer.

•If the TV loses power with time remaining on the GameTimer, when power is restored the TV will enter Input Lock mode (as if the GameTimer had been activated) and you will have to deactivate the Input Lock (as described above).

Using the control panel lock feature

You can lock the control panel to prevent your settings from being changed accidentally (by children, for example). When the control panel lock is On, none of the controls on the TV control panel will operate except POWER.

To lock the control panel:

1 Press and highlight the Locks menu icon.

2 Press T to display the PIN code entering screen.

3 Enter your four-digit PIN code and press .

4 Press T to highlight Control Panel Lock.

5 Press X and S or T to highlight On and press . When the control panel is locked and any button on the control panel (except POWER) is pressed, the message “NOT AVAILABLE” appears.

Locks

Enable Rating Blocking	Off
Edit Rating Limits
Channels Block
Input Lock	Off
Contont Panel Lock	Off	Off
GameTimer	Off	On
New PIN Code

To unlock the control panel:

Highlight Off in step 5 above, or press and hold the VOLUME

–button on the TV control panel for about 10 seconds until the volume icon appears.

Using the PC settings feature

You can view an image from a PC on the TV screen.

When a PC is connected to the TV's PC IN terminal, you can use the PC Settings feature to make adjustments to the image. If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the picture is affected by interference, readjust the Clock Phase and Sampling Clock.

To adjust the PC settings:

1 Repeatedly press to select PC input mode

( “Selecting the video input source to view” page 35).

2 Press and open the Setup menu.

3 Highlight PC Settings and press .

Note: If a PC is not connected or there is no pc input signal, this feature will be grayed out in the Setup menu.

4 Press S or T to highlight the item you want to adjust. 5 Press W or X to make the appropriate adjustments.

PC Settings

Horizontal Position		0
Vertical Position		0
Clock Phase		0
Sampling Clock		0
Auto Adjust
	Reset		Done

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

Mode	Description
Horizontal	Moves the picture left/right.
Position	The adjustment range is within ±50 from center.*
Vertical	Moves the picture up/down.
Position	The adjustment range is within ±10 from center.*
Clock Phase	Helps to reduce noise and sharpen the picture.
	The adjustment range is within ±16 from center.*
Sampling	Helps to reduce noise and minimize periodic
	vertical stripes on the screen.
Clock
	The adjustment range is within ±10 from center.*
Auto Adjust	Highlight this item then press	to get an
	optimum adjustment automatically.

*The default settings may vary depending on the input signal format.

49