Using the TV’s features
Using the stable sound
The Stable sound function limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial).
1 Press M, then press I or i to display the SOUND menu. 2 Press u or U to select Stable sound on the 2nd page.
SOUND | 2/2 | |
Stable sound |
| Off |
|
|
|
MENU Back EXIT Watch TV |
| |
3 Press I or i to select On or Off.
Note:
The Stable sound effect is active only when the sound outputs from the speaker.
Using the bass boost
1 Press T to display Bass boost level.
Bass boost | 70 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 While the Bass boost display is on the screen, press I or i to adjust the Bass boost level.
3 To turn off the Bass boost, press T to display Bass boost Off.
Bass boost | Off |
Note:
The Bass boost effect is active only when the sound outputs from the speaker.
Activating blue screen
With the blue screen function On, the screen will automatically turn blue and the sound will be muted when no signal is being received.
1 Press M, then press I or i to display the FUNCTION menu.
2 Press u or U to select Blue screen.
| FUNCTION | |
Teletext |
| Auto |
|
|
|
Auto format |
| On |
|
|
|
Blue screen |
| On |
|
| |
Side panel |
| 1 |
3 Press I or i to select On or Off.
Note:
In the PC input mode (- page 21), this function is not available.
Other features settings
Selecting the timer menu
The Timer is especially useful if you want the TV to turn itself on or off after a selected period of time.
1 Press M, then press I or i to display the TIMER menu.
TIMER |
|
Sleep timer | 00:00 |
|
|
On timer | 00:30 |
|
|
On timer Position | 03 |
MENU Back EXIT Watch TV
2 Press u or U to select the required timer mode (Sleep timer (Turn off the TV) or On timer).
The timer display will set by 10 minutes, up to 12 hours and 50 minutes.
3 Press the Number buttons
4 Press P to exit the menu. When setting the On timer, press u or U to select the On timer Position and enter the program position number you want to watch. Set the Standby mode by pressing J on the remote control or 1 on the TV.
Activation of the Timer is indicated by the green “On- timer indicator”, on the front of the TV (- page 8).
Notes:
•The TV will automatically turn itself off after approximately 2 hours if you do not operate the TV after turned on by on timer function.
•If you press and hold I or i to set the On or Off delay time, the timer display will set by 30 minutes, up to 12 hours 30 minutes.
Adjusting the brightness of side panel
You can adjust the brightness of side panel in 14:9 or 4:3, etc. mode.
1 From the FUNCTION menu, press u or U to select Side panel.
2 Press I or i to adjust the settings as required.
Side panel | 1 |
|
MENU Back EXIT Watch TV
20
