![](/images/new-backgrounds/1133863/13386351x1.webp)
Connecting your TV
Selecting the PC/HDMI audio mode
You can select PC audio or HDMI audio when using this function (- page 24).
1
2 Press u or U to select AV connection, then press Q to display the AV connection menu.
AV connection
PC/HDMI audio | PC |
|
|
HDMI audio | Digital |
MENU Back EXIT Watch TV
3 Press u or U to select PC/HDMI audio, then press I or i to select PC or HDMI.
Setting the HDMI audio mode
You can select sound of an HDMI or DVI device connected to the HDMI input terminals (- page 24) from three modes: Auto, Digital or Analog.
Note:
This function is available only when the PC/HDMI audio mode is set to HDMI.
1 From the AV connection menu, press u or U to select HDMI audio.
o
AV connection
PC/HDMI audio | HDMI |
|
|
HDMI audio | Auto |
MENU Back EXIT Watch TV
2 Press I or i to select Auto, Digital or Analog.
Connecting a computer
An analog RGB (15 pin) computer cable can be connected.
Connect a PC cable from the computer to the o RGB/PC terminal on the back of the TV.
The following signals can be displayed:
•VGA: VESA 640 5 480 @ 60 Hz
•SVGA: VESA 800 5 600 @ 60 Hz
•XGA: VESA 1024 5 768 @ 60 Hz
•
However, these signal formats are converted to match the number of pixels of the LCD panel.
Therefore, the TV may not display small text properly.
If you connect this unit to your PC, the compressed image is displayed in
Notes:
•Some PC models cannot be connected to this TV.
•There is no need to use an adapter for computers with DOS/ V compatible mini
•A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured depending on some signals. This is not the malfunction.
•If the edges of the picture are stretched, readjust the picture position adjustments in the PC Setting menu.
•Depending on the specification of the PC you are playing the
26