Connecting your TV
Side connections
You can connect a wide variety of auxiliary equipment via the terminals located on the right side of the panel o (2).
Please always refer to the owner’s manual of the equipment to be connected for full details.
Connection example
•To select the side inputs, press and hold o until the video
input mode list appears on the screen, then press u or U to select o2 (- page 21), then press Q.
•Before connecting any external equipment, turn off all main power switches.
•If you connect both of the
•If you connect mono sound equipment to o (2), connect the audio output of the equipment to the L/MONO jack on the TV.
•You can enjoy Video Games with this TV. However shooting games, where the player shoots at a target on the TV screen with a light gun, may not work because of the LCD Color TV properties.
Back connections
Connection example
•Before connecting any external equipment, turn off all main power switches.
•The unauthorized recording of television programs, DVDs, video tapes and other materials may infringe upon the provisions of copyright law.
•If you connect both of the COMPONENT VIDEO INPUT terminal and VIDEO input terminal, the COMPONENT VIDEO signal will appear on the screen (display changes to o 1C).
•The COMPONENT VIDEO INPUT consists of three component video signals (Y, PB/CB, PR/CR) and provides the best picture performance. These terminals can only be used with the component video compatible equipment e.g. DVD video player, etc.
•Additional equipment and cables shown are not supplied with this TV.
24
