Toshiba 51H94 owner manual Setting the Avhd device skip time, Setting the Hdmi audio mode

Chapter 6: Setting up your TV

Adjusting the color convergence

(continued)

7.If both red and blue need adjusting, you will need to perfrom steps 5 and 6 twice.

8.Press ENTER to display the cursor.

9.Repeat steps 4 to 8 to adjust another position.

10.Press EXIT to close the Convergence menu.

To reset your convergence adjustments:

1.Press MENU and open the SETUP menu.

2.Highlight CONVERGENCE and press ENTER.

3.Press RECALL.

The message, ÒWARNING: RESETS USER ADJUSTMENT TO FACTORY SETTINGSÓ appears.

4.Press ENTER to reset your convergence adjustments to the factory settings.

Setting the AVHD device skip time

When you connect an external AVHD device, such as the Toshiba Symbioª 160HD4 AVHD (audio/video hard drive) to one of the TVÕs IEEE-1394 ports, you can use this feature to set the number of minutes the device will skip forward or backward when you press the SKIP buttons.

Note:

•This TV will work best with the Toshiba Symbio™ 160HD4 AVHD, for recording high definition and standard definition material from either tuner and for controlling live TV (pause/rewind/fast forward/skip). When the AVHD is connected to the TV, the remote control keys (STOP, REW, PAUSE, PLAY, FF) are automatically activated to allow pausing of live TV.

•When you connect an AVHD (or a D-VHS) device, the TV Guide On Screen system is automatically configured to allow recording.

See page 23 for device connection information. See Chapters 5 and 7 for details about setting up and using the TV Guide On Screen system.

To set the AVHD device skip time:

1.Press MENU and open the SETUP menu.

2.Highlight AVHD SKIP TIME and press ENTER.

3.Press z or y to select the AVHD skip time and press

ENTER.

Setup

Installation	1		min
Sleep Timer	3		min
On/Off Timer	5 min
HDMI Audio Selection		15 min

Side Show Interval			2 Sec
AVHD Skip Time		15 min
Convergence
				DVD RTN
	Navigate	Select			Back	EXIT	Exit
				CH RTN

Setting the HDMI™ audio mode

To select the HDMI audio mode:

1. Press MENU and open the SET UP menu.

2.Highlight HDMI AUDIO SELECTION.

3.Press z or y to select the HDMI audio mode from Auto, Digital, or Analog (Auto is recommended). See ÒConnecting an HDMI or a DVI device to the HDMI inputÓ on page 19.

Setup

Installation

Sleep Timer

On/Off Timer

HDMI Audio Selection

Side Show Interval

AVHD Skip Time

Convergence

Navigate Select

Auto

Digital

Analog

Auto

2Sec

15min

DVD RTN	Back	EXIT Exit
CH RTN

50		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
H94(E)044-52(6b-Setup)	50	8/4/04, 12:41 PM

(E)(E)51/57/65H9351/57H94