Toshiba 51H94 owner manual Selecting the picture mode, Adjusting the picture quality

Chapter 8: Using the TV’s features

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four picture modes, as described below.

Mode	Picture Quality
Sports	Bright and dynamic picture (factory setting)
Standard	Standard picture settings (factory setting)
Movie	Lower contrast for darkened room (factory setting)
Preference	Your personal preferences

To select the picture mode:		ENTER
Press PIC MODE on the remote
control. The following popup menu
appears on-screen.
Picture Settings	Mode:Sports
Mode	Sports

Repeatedly press PIC MODE	PIC
	MODE
to cycle among the modes.

To select the picture mode using the menu system:

1.Press MENU and open the VIDEO menu.

2.Highlight PICTURE SETTINGS and press ENTER.

	Picture Settings	ANT 1
	Mode	Sporte
Video	Contrast	100
	Brightness	50
Picture Settings
	Color	50
Theater Settings
Advanced Picture Settings	Tint	0
	Sharpness	50

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN				Reset	Save	Done

3.Press z to highlight the MODE field, and then x• to select the mode you prefer.

4.To temporarily save the mode you selected, highlight DONE and press ENTER.

Note: Temporarily saved settings will apply until the TV is turned off or the input source is changed.

To permanently save the mode you selected, highlight SAVE and press ENTER.

Note:

•The picture mode you selected is for the current input selection only (ANT 1 in the example above). You can select a different picture mode for each input selection.

•If you select one of the factory-set picture modes (SPORTS, STANDARD, or MOVIE) and then change a picture quality setting (for example, increase the contrast or change the color temperature), the picture mode automatically changes to PREFERENCE in the Picture Settings menu.

Adjusting the picture quality

You can adjust the picture quality (contrast, brightness, color, tint, and sharpness) to your personal preferences.

To adjust the picture quality:

1.Press MENU and open the VIDEO menu.

2.Highlight PICTURE SETTINGS and press ENTER.

3.Press z or y to select the picture quality you want to adjust (CONTRAST, BRIGHTNESS, COLOR, TINT, or SHARPNESS), and then x and • to adjust the setting, as described in the table below.

							Picture Settings				ANT 1
								Mode			Sporte
Video								Contrast		100
								Brightness		50
Picture Settings
								Color		50
Theater Settings
Advanced Picture Settings								Tint		0
								Sharpness		50
			DVD RTN
	Navigate	Select		Back	EXIT	Exit
			CH RTN					Reset		Save	Done
Selection						x Pressing				•
contrast					lower				higher
brightness					darker				lighter
color					paler				deeper
tint					reddish				greenish
sharpness					softer				sharper

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

Note: The settings you selected are for the current input selection only (ANT 1 in the example above). You can select different settings for each input selection.

The picture qualities you adjusted are automatically saved in the PREFERENCE mode (see “Selecting the picture mode,” above left).

Resetting the picture settings

To reset the picture settings to their factory values:

1.Highlight RESET in the Picture Settings menu and press

ENTER.

2.Highlight SAVE and press ENTER.

Note: This resets the pictures settings for the current input source only (ANT 1 in this example).

Picture Settings		ANT 1
Mode		Sporte
Contrast	100
Brightness	50
Color	50
Tint	0
Sharpness	50
Reset	Save	Done

		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.	77
H94(E)077-83(8b-UseTV)	77	8/3/04, 6:36 PM

(E) 51/57H94