Toshiba 52XV540U, 46XV540U, 42XV540U Setting the Hdmi audio mode, Viewing the digital signal meter

Chapter 5: Setting up your TV

Setting the HDMI™ audio mode

To set the HDMI audio mode:

1 From the Audio menu, highlight Audio Setup and press T.

2 Press B or b to select HDMI 1 Audio and then press

Cor c to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI input” (- page 16).

Audio Setup

PC Audio	No
HDMI 1 Audio	Auto
MTS	Stereo
Language	English
Optical Output Format	Dolby Digital
Dolby Digital

Viewing the digital signal meter

You can view the digital signal meter in the ANT/CABLE digital TV input source only.

To view the digital signal meter:

1 From the Setup menu, highlight Installation and press T. A new set of Installation menu icons will appear.

2 Open the Terrestrial menu, highlight Signal Meter, and press T.

3 Press BbC c to select the digital channel you want to check. You can choose from Advanced or Basic signal meter.

Note:

• The physical digital channel number listed in the Signal

Meter screen may not correspond to a virtual TV

Dynamic Range Control

Compressed

channel number. Contact your local broadcasters to

obtain the RF channel numbers for your local digital

ResetDone

3 To save your setting, highlight Done and press T.

Mode Description

When viewing the HDMI 1 input, if digital audio from the HDMI input is available, it

Auto will be output. If not, the TV will automatically detect and output analog audio from the shared analog audio inputs.

stations.

• The signal strength does not change between virtual

channels on the same physical channel.

To close the screen and return to the Terrestrial menu:

Highlight Done and press T.

To return to normal viewing:

Press O.

Digital

When viewing the HDMI 1 input, digital audio from the HDMI input will be output.

When viewing the HDMI 1 input, analog

Setting the time zone

Analog audio from the shared analog audio inputs will be output.

Note: Because the PC and HDMI 1 inputs share the same analog audio input, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 4 on page 11 and “Setting the PC Audio” on page 57.)

The Time Zone setup will allow you to specify the correct time zone for your region. This feature will allow the TV to show the correct time zone information and you can see it displaying the TV status information (- page 60).

To set the time zone:

1 From the Setup menu, highlight Installation and press T. A new set of Installation menu icons will appear.

2 Open the Time Zone menu, highlight Time Zone Setup, and press T.

3 Press B and C c to select the region, highlight Done, and then press T.

After the time zone has been set, you will be asked to set the current Daylight Saving Time status.

To set the Daylight Saving Time status:

1 Press B and C c to select Yes or No, highlight Done, and then press T.

39