67
XV540U (E/F) Web 213:276
Chapter 8: Troubleshooting
LED indications
The green and yellow LED lights on the TV front indicate the
TV’s status, as described below.
Note: If the TV loses A/C power (e.g., a power outage occurs
or the power cord is unplugged), when power is restored, the
yellow LED will blink while the TV is booting until the remote
control is usable. This is normal and is not a sign of
malfunction.
LED Indication
Green is ON (solid)
The TV is operating properly.
Yellow is ON (solid)
Standby with Power-On Mode set to Fast.
See “Selecting the Power-On Mode” (-page 40).
Yellow blinks
Fan stopped (42XV540U and 46XV540U only).
Turn OFF the TV and unplug the power cord. Plug the
power cord in again and turn ON the TV.
Yellow blinks three times
TV is powering up.
Wait several seconds until the yellow LED stops blinking.
Green blinks slowly
Abnormal operation of BUS line.
Turn OFF the TV and unplug the power cord. Plug the
power cord in again and turn ON the TV.
Green blinks quickly
Power protect detection.
Turn OFF the TV and unplug the power cord. Plug the
power cord in again and turn ON the TV.
Green blinks slowly
Yellow blinks slowly
Charis calibration error.
Turn OFF the TV and unplug the power cord. Plug the
power cord in again and turn ON the TV.
If, after trying the solutions, the problem still exists:
In the U.S., call TACP Consumer Solutions at 1-800-575-
5469.
In Canada, locate the nearest Toshiba authorized service
depot by directing your web browser to www.toshiba.ca;
click “Home Entertainment,” and then click “Support.”
TV front
Yellow LED Green LED
42XV540U_EN.book Page 67 Thursday, March 6, 2008 11:06 AM