Toshiba 52XV540U Using the Freeze feature, Adjusting the picture, Selecting the picture mode

Chapter 6: Using the TV’s features

Using the FREEZE feature

To use the FREEZE feature:

1 When viewing the TV, press Bto make the picture a still picture.

2 To return to the moving picture, press Bagain.

Note: If the TV is left in FREEZE mode for more than 15 minutes, the FREEZE mode will automatically be released and the TV will return to moving picture.

Using the FREEZE function for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from the following modes, as described below.

Mode	Picture Quality
Sports	Bright and dynamic picture
Standard	Standard picture settings
Movie	Lower contrast for darkened room
PC	Designed for viewing of PC tables and
	documents
Preference	Your personal preferences

Note: PC mode is available for HDMI and PC inputs only (grayed out for other inputs).

1 From the Video menu, highlight Mode and press T.

2 Press B or b to select the picture mode you prefer and press T.

Note: The picture mode affects the current input only.

Adjusting the picture quality

You can adjust the picture quality (Contrast, Backlight, DynaLight™, Brightness, Color, Tint, and Sharpness) to your personal preferences.

Selection	Pressing C	Pressing c
Contrast	lower	higher
Backlight*	darker	lighter
DynaLight**	On/Off	On/Off
Brightness	darker	lighter
Color	paler	deeper
Tint	reddish	greenish
Sharpness	softer	sharper

*Backlight

This feature adjusts the brightness of the entire screen. When in video mode and no signal is input, this will automatically be set to 0. (Settings are stored in memory.)

**DynaLight

This function automatically strengthens the black coloring of dark areas in the video according to the level of darkness.

To adjust the picture quality:

1 From the Video menu, highlight Picture Settings and press T.

2 Press B or b to select the picture quality you want to adjust (Contrast, Backlight, DynaLight, Brightness, Color, Tint, or Sharpness), and then press C or c to adjust the setting, as described in the table above.

3 To save the new settings, highlight Done and press T. You can use any of the picture modes (- “Selecting the picture mode,” above left) as a starting point for adjusting the picture settings.

To revert back to the base mode that you began adjusting the picture settings from, highlight Reset and press T.

The picture qualities you adjusted are automatically saved in the Preference mode (- “Selecting the picture mode,” above left) until Reset is selected.

48