118 Picture and Sound Controls
6 Press the u (arrow) button.
7 Press the t/u (arrow) buttons to adjust.

Adjusting the audio

Muting the sound

Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute)
the sound. Each time you press the MUTE button, the mute mode
changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc.
NOTE
If you modify items in the Sound menu while Mute is active, Mute is
cancelled.

Selecting stereo/SAP broadcasts

The MTS (multi-channel TV sound) feature is only available for analog
signals on the ANT/CABLE input. When the TV receives a stereo or SAP
(second audio program) broadcast, the icon STEREO or SAP appears on
screen when the INFO button is pressed.
To listen in stereo sound:
1 Press the SETUP button.
2 Select Sound > MTS and press the OK button.
3 Press the p/q (arrow) buttons to select Stereo.
4 Press the EXIT button.
NOTE
❖ You can typically leave the TV in Stereo mode because it outputs the
type of sound being broadcast (stereo or monaural).
❖If the sound is noisy, select Mono.
❖If there is no sound in SAP mode, select Stereo.

Adjusting the audio balance

You can adjust the audio balance.
1 Press the SETUP button.
2 Select Sound > Balance and press the OK button.
3 Press the t/u (arrow) buttons to adjust the balance.
4 Press the EXIT button.
Adjusting the audio