Introduction 15
❖Place the TV far enough from walls and other objects to
allow proper ventilation. Inadequate ventilation may cause
overheating, which will damage the TV. THIS TYPE OF
DAMAGE IS NOT COVERED UNDER THE TOSHIBA
WARRANTY.
3 Do not plug in any power cords until after you have connected all
cables and devices to your TV.
4 Before connecting cables or devices to the TV, review the functions
of the TV’s connections and controls, see “Overview of cable types”
on page 27.
5 Connect your other electronic device(s) to the TV, see “Connecting
Your TV” on page 27.
6 Install the batteries in the remote control, see “Installing batteries”
on page 48.
7 See “Using the Remote Control” on page 48 for an overview of
the buttons on the remote control.
8 After connecting all cables and devices, plug in the power cords for
your TV and other devices. Then press the POWER button on the
TV control panel or remote control to turn on the TV.
NOTE: If the TV stops responding to the buttons on the remote
control or TV control panel and you cannot turn the TV off or on,
unplug the power cords for a few seconds and then plug them in and
try again.
9 See “Navigating the menu system” on page 63 for a quick
overview of navigating the TV’s menu system.
10 Program channels into the TV’s channel memory, see “Auto
Tuning” on page 67.
11 For details on using the TV’s features, see chapters 6, 7, and 8.
12 For help, refer to “Troubleshooting” on page 173.
13 Fortechnicalspecications,see“Specications”onpage182.
TV front and side panel controls and connections