Toshiba 72CM9UA How to replace the lamp unit, Equipment connections, Introduction, started

Models: 72CM9UA 72CM9UE 62CM9UE

1 50
Download 50 pages 11.57 Kb
Page 47
Image 47
How to replace the lamp unit

How to replace the lamp unit

Turn off the TV and remove the power plug from the wall outlet.

Allow the lamp to cool for at least 1 hour before replacing it.

On the lamp unit door on the side of the TV, loosen the screw using a manual screwdriver, and then remove the lamp unit door.

Lamp unit door detail

TV back

Loosen screw using manual screwdriver

Using a manual screwdriver, loosen the two screws on the lamp unit.

Lamp unit screws

Grasp the lamp unit handle and gently pull the lamp unit straight out of the TV. Set the old lamp unit aside.

Remember to wear lint-free gloves when replacing the lamp unit.

Introduction

Carefully insert the new lamp unit straight into the

 

started

TV until it is fully seated.

 

Getting

Notes:

 

 

 

• Never subject the lamp unit to excessive shock.

 

 

• Never touch the lamp unit glass or otherwise get it

 

 

dirty. Doing so may affect the image quality and

 

 

reduce the service life of the lamp.

theUsing

featuresTV’s

Using the manual screwdriver tighten the two

 

 

screws. Make sure that the screws are hand-tight

 

 

only, do not use an electric screwdriver to avoid

 

 

over-tightening.

 

 

Reattach the lamp unit door, making sure to insert

 

 

the hooks on the left side of the lamp unit door

 

 

inside the opening in the TV cabinet.

 

 

 

 

Viewingteletext

Lamp unit door

Equipment connections

Replace the screw and hand-tighten using a manual

 

screwdriver.

 

Plug in the power cord and turn on the TV. After the

 

initial warm up period (which may take several

 

seconds for full picture brightness), the TV should

 

now operate normally.

section

If there is no picture, the picture is very dark or the

 

TV does not turn on, turn it back off and remove the

Reference

power plug from the wall outlet. Repeat steps 1 to 7

 

to ensure that the lamp unit has been installed

 

correctly.

 

Put the old lamp into the now empty lamp unit box

 

and dispose of it according to local Government

 

guidelines. Make sure it is out of reach of children

 

and animals.

 

Note:

Wear soft, lint-free gloves when replacing the lamp unit.

If you require further assistance, contact the nearest Toshiba Authorized Service Center or dealer.

47

#01E44-50_6272CM9UAE

47

05.10.18, 3:23 PM

Black

Toshiba 62/72CM9UA/E (E)

Page 47
Image 47
Toshiba 72CM9UA How to replace the lamp unit, Allow the lamp to cool for at least 1 hour before replacing it, Introduction