Connecting a cable converter box and VCR | Toshiba 62HM14, DLPTM

Connecting your TV

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while watching another channel. To watch basic cable and use the TV’s features, select ANT-1.

To view premium channels or record with the VCR, select ANT-2, tune the TV and VCR to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

•four coaxial cables

•one set of standard A/V cables

From Cable

TV

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S-video cable (in the S-video jacks) instead of a standard video cable. Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

OUT IN

			IN	Cable converter box
				Cable converter box
IN from ANT OUT to TV
CH 3			OUT
CH 3
CH 4	VIDEO	L	R
			AUDIO

Stereo VCR

10

62HM14(E)08-16

10

1/24/05, 1:42 PM

(E) 62HM14

Image 10

Toshiba 62HM14, DLPTM owner manual Connecting a cable converter box and VCR, Connecting your TV

Contents

Dlptm Projection Television Lamp Unit Replacement Dear Customer For replacement of the obsolete outlet InstallationDAMAGE! Never place the TV on Service Care Important notes about your Dlptm projection TV This TV contains several cooling fans to moderate Important Safety Information Introduction Welcome to Toshiba IntroductionExploring your new TV Connecting your TV Connecting an antenna or cable TV Using Connecting a VCRConnecting a cable converter box You will need Three coaxial cables Connecting a cable converter box and VCR Connecting your TV Connecting a DVD player or satellite receiver and a VCR From Antenna Stereo VCR From DTV Antenna Connecting two VCRs Connecting a camcorder One Hdmi cable type a connector One pair of standard analog audio cables Connecting an audio system Installing the remote control batteries Using the remote controlPreparing the remote control for use Remote control effective range Remote control codes Using the Remote Control DVD/VCR Combo IntroductionTV/VCR Combo DVD player Point the remote control Directly at the device CT-90159 Learning about the remote control Connecting YourTV Control Setting up your TV Setting up your TVLearning about the menu system Selecting the antenna input Changing the on-screen display languagePress y or z to highlight your desired language To program channels automatically Adding channels to the TV’s memoryProgramming channels automatically Press Enter Press z to select CH Program Selecting the Quick Restart Settingup yourTVChanging channels Adding and erasing channels manually Adjusting the channel settings Using the TV’s featuresUsing the TV’s Features Press Enter to display Favorite CHFavorite CH menu Press z or y to highlight Labeling channelsClear Using Features Appendix Index Connecting yourTVUsingthe RemoteControl Settingup YourTV TheTV’s Press PIC Size on the remote control Theater Wide 1 picture size For 43 format programs Press MENU, and then press x or until Picture menu Press PIC Size to select the Theater Wide 2 or 3 modePress Enter to display the Scroll Adjustment mode Appears Press y or z to highlight Auto ASPECT, and then press Using the Auto Aspect featurePress y or z to select ON, and then press Enter Using the POP double-window feature UsingtheTV’s Features Switching the main and POP pictures Switching the speaker audio main or POP Using the programmed channel search function Double-Window aspect ratio Using the favorite channel search function About the auto favorite feature Entering the PIN code Using the Locks menuUsing the V-CHIP menu If you cannot remember your PIN code TV Rating Independent rating system for broadcasters Enable BlockingOFF To release your setting Unlock TV Rating menu appears Press z or y to select an item Mpaa Rating Independent rating system for movies Settingup YourTV UsingtheTV’s Features Appendix IndexMpaa Rating Locks menu Locking channelsUnlocking programs temporarily Repeat steps 2 and 3 for other channels Press y or z to highlight Clear ALL, and then press Enter OFF Locking the video inputsChanging the PIN code From the Locks menu, press y or z to highlight NEW PIN Code Selecting the picture mode Adjusting the pictureAdjusting the picture quality Press x or to select the mode you prefer Selecting the color temperatureSaving your new preferences Reset Using the CableClear DNR featureResetting picture adjustments Done Cinema Mode Selecting the Lamp modeSelecting the cinema mode Press y or z to select Selecting the video input source Never Connect this TV to a Personal Computer PC Press y or z to highlight Caption or TEXT, and then press Using the closed caption featureTo view text, highlight T1, T2, T3, or T4 Press y or z to highlight Sleep TIMER, and then press Setting the on timerSetting the sleep timer Press Enter to start the timer Setting the clock To display the time on-screen Press Recall Muting the sound Adjusting the soundSelecting stereo/SAP broadcasts Press y or z to adjust the item, then press Enter Using the WOW surround sound featureAdjusting the sound quality Press y or z to highlight Audio SETTINGS, and then press Using the StableSound feature Resetting your audio adjustmentsTo turn off the StableSound feature Select OFF in above Selecting the Audio OUT sound Turning off the built-in speakersTo turn on the built-in speakers Select on in above Selecting the background of the menu display Understanding the auto power off featureUnderstanding the last mode memory feature Displaying on-screen information Appendix Lamp unit replacement User-replaceable component When to replace the lamp unit Introduction Connecting your TV How to replace the lamp unitUsing Setting up your TV Features Replace the thumb screw and hand-tighten No picture Dark picture TV will not turn on LED indications Introduction Connecting YourTVUsingthe RemoteControl Settingup YourTV Lamp unit disposal Specifications VIDEO/AUDIO Input Troubleshooting Limited United States Warranty Index 05-01