Toshiba 62HM14, DLPTM owner manual Connecting two VCRs, Connecting a camcorder

Connecting your TV

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You also can record from one TV channel while watching another TV channel.

You will need:

•two coaxial cables

•two sets of standard A/V cables

From

Antenna

VCR1

IN

IN from ANT OUT to TV

CH 3			OUT
CH 4	VIDEO	L	R
			AUDIO

TV

VCR2	*	**
	VIDEO	AUDIO
	L	R
		IN
CH 3		OUT
CH 4

Connecting a camcorder

This connection allows you to watch video materials recorded on a camcorder.

You will need:

•one set of standard A/V cables

Camcorder

VIDEO AUDIO

OUT

L

R

Note:

If you have VCRs with S-video, use S-video cables instead of standard video cables for better picture performance. Do not connect both a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

Do not connect the same VCR to the output and input jacks on the TV at the same time. To dub or edit, VCR 2 must select Line IN, and the TV must select VIDEO 1 (see “Selecting the antenna input” on page 23).

*The VIDEO OUT jack does not output the POP picture.

**The AUDIO OUT jacks can output the sound of either the Main or POP picture (see “Selecting the Audio OUT sound” on page 54).

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Note:

If you have a camcorder with S-video, use an S-video cable instead of a standard video cable for better picture performance. Do not connect both a standard video cable and an S-video cable at the same time, or the picture performance will be unacceptable.

14

Video-3 (side panel)

62HM14(E)08-16 14 1/24/05, 1:42 PM

(E) 62HM14