How to replace the lamp unit (continued)
5. Grasp the lamp unit handle and gently pull the lamp unit straight out of the TV. Set the old lamp unit aside (see ÒLamp unit disposalÓ on page 64).
Wear gloves when replacing the lamp unit.
6. Carefully insert the new lamp unit straight into the TV until it is fully seated.
Appendix
Note :
•Never subject the lamp unit to excessive shock.
•Never touch the lamp unit glass or otherwise get it dirty.
Doing so may affect the image quality and reduce the service life of the lamp. See “Cleaning the lamp unit glass” at right.
7. Using a manual Phillips screwdriver, tighten the two lamp unit screws.
Note:
Lamp unit screws (use manual Phillips screwdriver only)
Cleaning the lamp unit glass
If you accidentally touch the lamp unit glass or otherwise get it dirty, wipe it with a
CAUTION: NEVER clean
a hot lamp with any type of flammable liquid or aerosol cleaning agent. Many ordinary cleaning agents (such as glass cleaners) contain chemicals that may be flammable at certain temperatures. If the lamp unit is not allowed to cool for at least one (1) hour, such chemicals may ignite.
NOTE : Make sure the lamp unit and screws are installed securely; otherwise, the TV may not turn on
and the lamp life may be shortened.
(Continued on next page)
62
62 | 5/10/05, 12:39 PM |
Black
(E) 46/52/62HMX85