Toshiba 62HMX85 How to replace the lamp unit continued, Introduction, Connecting, yourTV, Index

How to replace the lamp unit (continued)

8. Reattach the lamp unit door, making sure to insert the hooks on the left side of the lamp unit door inside the opening in the TV cabinet.

Insert the hooks inside the TV cabinet opening.

Lamp unit door

9. Replace the thumb screw and hand-tighten.

Thumb screw (hand-tighten only)

Lamp unit door

NOTE : Make sure the lamp unit door is installed securely; otherwise, the TV may not turn on.

10. Plug in the power cord and turn on the TV. After the initial warmup period (which may take several seconds for full picture brightness), the TV should operate normally. If any of the following conditions exist, turn off the TV, unplug the power cord, and repeat steps 1Ð9 to ensure that the lamp unit and lamp unit door are installed correctly:

¥No picture

¥Dark picture

¥TV will not turn on

If, after repeating steps 1Ð9, the problem still exists:

Locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click ÒHome

Entertainment,Ó and then click ÒSupport.Ó

#01E60-64_46/52/62HMX85 63 5/10/05, 12:39 PM

Black

Introduction
Connecting	yourTV
Usingthe	remotecontrol
Settingup	yourTV
UsingtheTVÕs	Features
Appendix
Index

63

(E) 46/52/62HMX85