Connecting a cable converter box and VCR | Toshiba 51H85C, 65H85C

Connecting your TV

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while watching another channel. To watch basic cable and use the TVÕs features, select ANT-1.

To view premium channels or record with the VCR, select ANT-2, tune the TV and VCR to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

¥four coaxial cables

¥one set of standard A/V cables

From Cable

TV

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an

S-video cable (in the S-video jacks) instead of a standard video cable. Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under Copyright Law and may subject you to civil and criminal liability.

OUT IN

IN

Cable converter box

IN from ANT OUT to TV

CH 3	OUT

CH 4	VIDEO	L	R
			AUDIO

Stereo VCR

10

Image 10

Toshiba 51H85C, 65H85C, 57H85C owner manual Connecting a cable converter box and VCR, If you have a VCR with S-video, use an

Contents

Projection Television Index Safety Precautions Dear Customer Important Safety Instructions Installation Service Care Important Safety Precautions for Split Cabinet Feature Important Safety Information Introduction Welcome to Toshiba Introduction Connecting YourTV ControlExploring your new TV Connecting your TV Connecting your TV Connecting a VCR Connecting a cable converter box Connecting a cable converter box and VCR If you have a VCR with S-video, use an Connecting a DVD player or satellite receiver and a VCR From Antenna Stereo VCR From DTV Antenna Connecting two VCRs Connecting a camcorder Introduction Connecting an Hdmitm or a DVI device to the Hdmi input¥ one Hdmi cable type a connector ¥ one pair of standard analog audio cables Connecting an audio system Remote control effective range Preparing the remote control for useInstalling the remote control batteries If you have a Toshiba device Using the remote control Remote control codesFor future reference, write down the codes you used Remote control codes 100 Remote Control function key chart CLEAR/EXIT Adjusts the volume level Learning about the remote controlUsing remote CH RTN returns to the memorized channel UsingtheTVÕs Features Appendix Connecting YourTV Usingthe Remotecontrol SettingupLearning about the menu system Selecting the antenna input Setting up your TVChanging the on-screen display language Press y or z to highlight your desired language Usingthe Features Connecting YourTV ControlUsing Remote Settingup YourTV TVÕs Adding channels to the TVÕs memory Changing channels Adding and erasing channels manually Usingthe Remotecontrol Adjusting the color convergenceIntroduction Connecting your TV Manually adjusting the color convergence To reset your adjustments Up TV Switching between two channels using SurfLockª Adjusting the channel settingsSwitching between two channels using Channel Return Programming your favorite channels Favorite CH Press y or z to highlightPress Enter to display the Favorite CH menu Labeling channels Introduction Connecting YourTV Usingthe RemotecontrolSettingup yourTV Clear Selecting the picture size Natural picture size Setting your Introduction Connecting YourTVUsingtheTVÕs Features Scrolling the TheaterWide¨ picture TheaterWide 2 and 3 only Settingup YourTV UsingtheTVÕs Features Appendix Index Using the Auto Aspect featureUsingthe control Enter Press Split to display the POP window Using the POP double-window featurePOP window using the VCRÕs channel keys Window Video 1, Video 2, Video 3, ColorStream HD1 Usingthe Remotecontrol Settingup YourTV TheTVÕs Switching the main and POP picturesSwitching the speaker sound of main and POP programs Using Using the programmed channel search function Double-Window aspect ratio Using the favorite channel search function About the auto favorite feature Entering the PIN code Using the Locks menuUsing the V-CHIP menu If you cannot remember your PIN code Enable Blocking TV Rating Independent rating system for broadcasters Mpaa Unrated Mpaa Rating Independent rating system for moviesMpaa Rating TV None Rating Unlocking programs temporarily Connecting yourTVLocking channels Repeat steps 3 and 4 for other channels Press y or z to highlight Clear ALL, and then press Enter OFF Locking the video inputsChanging the PIN code Press Enter New PIN code is now active Selecting the picture mode Adjusting the pictureAdjusting the picture quality Press x or to select the mode you prefer Selecting the color temperatureSaving your new preferences Reset Using the CableClear¨ DNR featureResetting picture adjustments Òdoneó Press y or z to select Selecting the display format for 480p signals onlySelecting the cinema mode Film To highlight Custom Menu Selecting the video input sourceThat input source To exit the menu, press Exit Using the closed caption feature Press y or z to highlight Caption or TEXT, and then press Setting the on timer Setting the sleep timer Press Enter to start the clock To set the clockPress y or z to highlight Clock SET, and then press Enter To display the time on-screen Press Recall Muting the sound Adjusting the soundSelecting stereo/SAP broadcasts Press y or z to adjust the item, then press Enter Using the WOWª surround sound featureAdjusting the sound quality Audio Settings menu appears Using the StableSound¨ feature Resetting your audio adjustmentsTo turn off the StableSound feature Select OFF in above To turn on the built-in speakers Select on in above Turning off the built-in speakersSelecting the Audio OUT sound Press y or z to select Main or POP, and then press Enter Selecting the background of the menu display Understanding the auto power off featureUnderstanding the last mode memory feature Displaying on-screen information Specifications Appendix Black box appears on the screen TroubleshootingAntenna T2, T3, or T4. Turn closed captioning OFF Limited Canada Warranty Index Page Manufactured by