Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
8
Connecting your TV
Note: Cables are not supplied with your TV.
●Coaxial cable is the cable that comes in from your antenna, cable TV
service, or cable converter box. Coaxial cable uses “F” connectors.
●Standard A/V (audio/video) cables usually come in sets of three, and
are typically color-coded according to use: yellow for video, red for
stereo right audio, and white for stereo left (or mono) audio.
On your TV’s back panel, the standard A/V connectors are
color-coded in the same manner as the cables.
●S-Video cable is for use with video equipment with S-Video.
●Component video cables come in sets of three, and are for use with
video equipment that has component video. (ColorStream® is
Toshiba’s brand of component video.)
●DVI-D digital double-link cable is for use with video equipment that
has a DVI-D digital double-link connector (see page 15).
NOTE REGARDING PICTURE QUALITY
When connecting video equipment to your Toshiba TV:
●For GOOD picture quality: Use a standard yellow video cable.
●For BETTER picture quality: If your equipment has S-video, use
an S-video cable instead of a standard yellow video cable. (You still
must connect the standard red and white audio cables for full
system connection, but do not connect the standard yellow video cable
at the same time, or the picture performance will be unacceptable.)
●For BEST picture quality: If your equipment has component
video (or DVI), use either component video cables (or a DVI cable)
instead of a standard video or S-video cable. (You still must
connect the standard red and white audio cables for full system
connection.
Connecting a VCR
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
•two coaxial cables
•one set of standard A/V cables
ANT( 75 )
ANT-1 ANT-2OUT
P
B
P
R
Y
L/
MONO
AUDIO
S-VIDEO
VIDEO 1 VIDEO 2
COLOR
STREAM
HD-1
COLOR
STREAM
HD-2
VIDEO
R
IN
L
AUDIO
R
P
B
P
R
Y
L
AUDIO
R
VIDEO
L/
MONO
ON OFF
OUT
L
AUDIO
AUDIO
VAR
R R
OUT TheaterLink
CHANNEL IN
AUDIO CENTER
DVI/HDCP IN
R
AUDIO
L
IN from ANT
VIDEO AUDIO
OUT to TV
CH 3
LR
CH 4
IN
OUT
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an
S-video cable instead of a standard video
cable.
Do not connect a standard video cable and
an S-video cable to VIDEO 1 (or VIDE O 2) at
the same time, or the picture performance
will be unacceptable.
Component video cables
Coaxial (antenna) cable
Standard A/V cables (red/white/yellow)
S-video cable
CAUTION:
Do not plug in any power cords until you have
finished connecting all equipment.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
DVI-D digital single-link cable
TheaterLink cable
From Cable Box or Antenna
Stereo VCR
TV