Toshiba 65HX83, 57HX83, 51HX83 Device code setup, Searching and sampling the code of a device

Using the Remote Control

Programming the remote control for use with your audio/video devices

Device code setup

1.Refer to the multi-brand remote control device code table on pages 22Ð23 to find the code for the brand of your device.

If more than one code is listed, try each one separately until you find the one that works.

2.Press MODE until the Mode indicator for the device (CABLE/ SAT, VCR, DVD, AUDIO1, AUDIO2) lights up.

3.While holding down the RECALL button, press the Channel Number buttons to enter the four-digit code for your brand of device. If a valid code is entered, the mode indicator will blink twice. If an invalid code is entered, the mode indicator will blink one long blink.

4.Point the remote control at the device and press POWER to test the code.

If the device turns on, you have entered the correct code.

If the device does not respond to the remote control, you may have entered the wrong code. Repeat steps 3 and 4 using another code.

Note: In addition to POWER, confirm that all necessary keys on the TV remote control operate your device. If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device). If, after trying all listed codes, the necessary keys do not operate your device, use the device’s original remote control.

5. Press MODE to select the TV mode to control the TV.

Searching and sampling the code of a device (8500)

If you do not know the device code for a particular device, you can cycle the remote control through the available codes for that device mode and sample the functions to find the code that operates the target device. The keys available to be sampled, provided they are applicable to that mode, are POWER, 1, VOL y, CH y, and PLAY. Invalid keys will be ignored while in program mode.

To cycle through each available device code and sample its functions:

1.Press MODE to select the mode you want to set up.

2.While holding down the RECALL button, press 8 Ð5 Ð0 Ð0. The remote control will enter program mode.

3.Point the remote control at the target device and press POWER (or other function buttons that are available to be sampled).

4.If the device responds to the remote control:

Press RECALL to store the device code.

The mode indicator will blink twice and the remote control will exit the program mode.

If the device does not respond to the remote control: Press y, and then press POWER.

Repeat this step until the device responds to the remote control, and then press RECALL.

Note: When a search cycle is completed, the mode indicator will blink three times. The remote control will begin to cycle through the available codes again. If no key is pressed within 10 seconds while programming, the remote control will exit the program mode and return to the previous code.

Note:

•Although your new TV’s remote control includes codes for many devices, it may not include codes for some or all of the features on certain devices you wish to control. if you are unable to program the TV’s remote control to operate your device or some of the features on that device, use the device’s remote control or the controls on the device.

POWER

TV

CABLE/SAT LIGHT SLEEP POWER

VCR
DVD		1			2	3			Numbers
AUDIO1
AUDIO2		4			5	6
									MODE
MODE
		7			8	9
PIC SIZE		+10
					0
ACTION		100/				ENT
MENU		O	FAV		ORI
	NF					T
	I				TE
						HE
E						LI	AT
								E
ID						N			R
U							K
G		LE	SUB	TIT
		TIT
					LE	A
P
U						U
T		FAV				DI			y
S
E						O
		ENTER
		FAV
CH						VOL
DVD RTN		EXIT							RECALL
		DVD CLEAR
CH RTN		INPUT	RECALL			MUTE

SLOW/DIR SKIP/SEARCH

20