Toshiba 65NH84 owner manual Connecting a DVD player or satellite receiver and a VCR

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel.

You will need:

•two (or three, if satellite receiver is used) coaxial cables

•one set of standard A/V cables (between the TV and VCR) (plus one additional set of standard A/V cables if satellite receiver is used)

•one S-video cable (between the TV and DVD player/satellite receiver)

•one pair of standard audio cables (between the TV and DVD player/satellite receiver)

Stereo VCR

IN

IN from ANT OUT to TV

CH 3			OUT
CH 4	VIDEO	L	R
			AUDIO

From

Antenna TV

DVD Player

	AUDIO
	OUT
	L
From	R
	S-VIDEO VIDEO
Satellite	OUT OUT
Dish	Satellite Receiver

AUDIO

OUT

L

IN from ANT

R

S-VIDEO VIDEO

OUT OUT

Note:

For the highest possible picture quality from a DVD player or satellite receiver without component video or HDMI, use an S-video cable. (If your DVD player has component video, see page 12. If your DVD player or satellite receiver has HDMI or DVI, see page 15.)

Do not connect both an S-video cable and a standard video cable between the TV and DVD player/satellite receiver at the same time or the picture performance will be unacceptable.

Do not connect the DVD player/satellite receiver and VCR to the same set of Video inputs on the TV. (See the illustrations, which show the DVD player/satellite receiver connected to Video-1 on the TV, and the VCR connected to Video-2 on the TV.)

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Introduction
Connecting	yourTV
Usingthe	RemoteControl
Settingup	yourTV
UsingtheTV’s	Features
Appendix
Index

11