102 Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.4.1
(LAN) or wide area network (WAN), consult your network
administrator.
To use a dial-up connection, have your network administrator
configure your computer for the network and supply you with
the telephone number for the dial-up connection. To set up
the network connection, use the Dial-Up Networking Wizard:
1Click Start and point to All Programs.
2Point to Accessories, then to Communications.
3Click Network Setup Wizard or Network
Connections.
4Enter the phone number of your network connection and
let the program dial the number.
The computer connects with the network.
Powering down the computer
When you power down the computer, you have a number of
options to choose from:
❖Turn Off or Shut down, which power off the computer
❖Hibernation, which saves the current operating state to
the hard disk and powers off the computer
❖Standby, which saves the current operating state to
memory and enters a low power mode
❖Restart, which restarts the computer
Each option has its advantages.
TECHNICAL NOTE: Before using any of these options to power
down your computer, save your files and make sure the disk
activity lights are off.
If you change your mind and decide to continue working after
all, wait a few seconds before turning the computer on again.