Toshiba A20 Checking total memory

74 Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.4.1
3Carefully remove the module from the slot.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector (on the side you insert into the
computer).
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
Removing the memory module
4Complete the procedure by following steps 9 through 14
in “Installing additional memory (optional)” on page 65.
Checking total memory
When you add or remove memory, you can check that the
computer has recognized the change. To do this:
1Click Start, Control Panel