User’s Manual 2-28
The Grand Tour
Replacing the batteries
When the batteries in the remote controller reach the end of their life, the
remote controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.
Full size remote controller
1. Open the battery cover on the back side of the remote controller.
2. Replace the batteries. Be sure to place the batteries with their polari-
ties (+ and -) in the correct position.
Figure 2-19 Removing the batteries
3. Close the battery cover. Close the cover securely until it clicks.
Slim size remote controller
1. Open the battery cover on the back side of the remote controller.
2. Hold down the stopper and slide the battery out of battery case.
Figure 2-20 Removing the batteries
3. Insert the battery in place. Be sure to place the batteries with correct
polarities. Press the battery down to the stopper then push it forward
to fit into the battery case.
4. Close the battery cover. Close the cover securely until it clicks.
BATTERIES
BATTERY
STOPPER