112 Learning the Basics
Using Standby
5.375 x 8.375 ver 3.1
6Click OK.
The computer is now set to automatically go into Hibernation
when your option settings occur.
For more information about the Power Saver utility, see
“Power Management” on page 196.

Starting again from Hibernation mode

To start the computer from Hibernation mode, press and
release the power button. The computer returns to the screen
you were using.
If you put the computer in Hibernation mode by closing the
display panel, you can start it again by opening the display
panel.
If your computer is running on batteries, you cannot start it
again by opening the display panel. To turn the system back
on, press the power button.
Using Standby
If you are using the Windows® XP Home operating system,
or are using the Windows® XP Pro operating system and are
not a member of a domain, power off the computer using the
Standby command as follows:
1 Click Start, Turn off computer.