111
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 3.1
To put the computer into Hibernation mode by pressing the
power button or closing the display panel, you must preset the
mode.
1Open the Start menu, click Control Panel, then
Performance and Maintenance.
2Click the Tos hib a Po wer Sav er ic on.
3Click the Setup Action tab.
The TOSHIBA Power Saver Properties window appears.
Sample TOSHIBA Power Saver Properties window
4Select Hibernation for the options you want.
When I press the power button
Set this option to Hibernate so that the computer
will go into Hibernation mode when you press the
power button.
When I close the lid
Set this option to Hibernate so that the computer
will go into Hibernation mode when you close the
display panel.
5Click Apply.