199
If Something Goes Wrong
Resolving a hardware conflict
the ExpressCard for information about using the card under the
operating system.
ExpressCard® checklist
❖Make sure the card is inserted properly into the slot.
❖Make sure all cables are securely connected.
❖Occasionally a defective ExpressCard®slips through quality
control. If another computer with a ExpressCard slot is
available, try the card in that machine. If the card malfunctions
again, it may be defective.
Resolving ExpressCard® problems
Here are some common problems and their solutions:

The slot appears to be dead. ExpressCards® that used to work

no longer work.

Check the ExpressCard® status:
1Click Start, Control Panel, System and Maintenance, and
then Device Manager.
2Double-click the appropriate ExpressCard, which will be listed
under one of the categories shown, for example: Disk drives,
Network adapters, Other, etc.
The operating system displays your ExpressCard’s Properties
dialog box, which contains information about your
ExpressCard configuration and status.

The computer stops working (hangs) when you insert an

ExpressCard®.

The problem may be caused by an I/O (input/output) conflict
between the socket and another device in the system. Use Device
Manager to make sure each device has its own I/O base address.
See “Fixing a problem with Device Manager” on page190 for more
information.
Since all ExpressCards® share the same socket, each card is not
required to have its own address.