207
If Something Goes Wrong
Develop good computing habits
displays a message that the restore point was successfully
created.
6Click OK.
Then, at a later time, you can re-establish your Windows®
configuration using the saved Restore Point. To do this:
1Click Start, All Programs, Accessories, System Tools, and
then System Restore.
2Click Next.
3A list of previously created Restore Points displays, showing
the timestamp and description of each Restore Point.
This list may contain Restore Points that you did not create. Restore
Points labeled System Checkpoint were automatically created by the
Windows® operating system. Other Restore Points may have been
created automatically by applications when they were installed.
4Select the Restore Point you want to use, and then click Next.
The utility displays the timestamp and description of the
selected Restore Point.
5Verify that the Restore Point you selected is the correct one. If
it is not, click Back to return to step 4.
6Close all programs and save all open files.
7Click Finish, and then Yes to begin the system restore.
8Your Windows® operating system configuration will now be
restored to the state it was in when the chosen Restore Point
was created, and then the computer will be automatically
restarted.
Backing up your data or your entire computer with the Windows® operating system
The most valuable component of your computer system is the data
you create and store on its internal storage drive. Since problems
with either hardware or software can make the data inaccessible or
even destroy it, the next most valuable component of your computer
system may be a recent backup of your data.
Fortunately, the Windows® operating system offers a convenient
way to back up your computer or just your important files to optical
drives, or hard drives. An external hard drive is recommended in
case the internal storage drive fails. No additional software is
required. Most of the optical drives built into recent Toshiba
NOTE