Toshiba A660D, A665, A665D Keyboard, USB Memory BIOS Support Type, Wake-upon Keyboard, HDD, FDD, Enabled, Disabled, TOSHIBA Leading Innovation

Satellite A660/A660D, Satellite A665/A665D

To change the boot drive, follow the steps below.

1.Hold down F12 and boot the computer. when the

TOSHIBA Leading Innovation >>> screen appears, release the F12 key.

2.Use the up and down cursor keys to select the boot device you want and press ENTER.

If a Supervisor Password has been set, manual boot device selection functions may be restricted.

The boot device selection methods described above will not change the boot priority settings that have been configured in HW Setup. In addition, if you press a key other than one of those listed, or if the selected device is not installed, the system will continue to boot according to the current and available settings in HW Setup.

USB Memory BIOS Support Type

This option allows you to set the type of the USB memory to be used as a startup device.

HDD	Sets the USB memory to be the equivalent of a
	hard disk drive (default). With this setting, the
	USB memory device can be used to start the
	computer as though it were a hard disk drive
	based on the hard disk drive settings within both
	the Boot Priority and HDD Priority options
	detailed previously.
FDD	Sets the USB memory to be the equivalent of a
	floppy diskette drive. With this setting, the USB
	memory device can be used to start the
	computer as though it were a floppy diskette
	based on the floppy diskette drive settings within
	the Boot Priority option detailed previously.

Keyboard

Wake-up on Keyboard

When this feature is enabled, and the computer is in Sleep Mode, you can turn on the system by pressing any key. However, please be aware that this option will only work with the internal keyboard and only when the computer is in Sleep Mode.

Enabled Enables the Wake-up on Keyboard function.

Disabled Disables the Wake-up on Keyboard function (Default).

7-4 User’s Manual