Toshiba A660D, A665, A665D eSATA device

Satellite A660/A660D, Satellite A665/A665D

Problem	Procedure
External devices	Some external devices may not work when
connected to the	connected to a compatible port if the Sleep and
compatible ports do	Charge function is enabled.
not work when	Reconnect the external device after turning the
connected to a
	computer ON.
compatible port.
	If the external device still does not work, connect
	device to an USB port that does not have the
	Sleep and Charge function-compatible icon ( )
	or change to disable the Sleep and Charge
	function.
The “USB Wakeup	When Sleep and Charge function is enabled, the
function” does not	“USB WakeUp” function does not work for ports
work.	that support the Sleep and Charge function.
	In that case, use an USB port that does not have
	the Sleep and Charge function-compatible icon
	( ) or change to disable Sleep and Charge
	function.

eSATA device

In addition to the information in this section, please also refer to the documentation supplied with your eSATA device.

Problem	Procedure
eSATA device does	Remove the eSATA device from the computer
not work	and then reconnect it to a free port it in order to
	ensure it is firmly attached.
	A connected eSATA device may not be
	recognized if it is connected to the computer’s
	eSATA/USB combo port while the computer is in
	Sleep Mode or Hibernation Mode. If this occurs,
	disconnect the eSATA device and then reconnect
	the device while the computer is turned on.
	Ensure that any required eSATA device drivers
	are properly installed - to achieve this you should
	refer to both the device documentation and the
	operating system documentation.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

8-18 User’s Manual