Settings

4. Tap Device name. Enter a name and tap OK.

Pairing your tablet with a Bluetooth device

You must pair your tablet with another device before you can connect to it. Once you pair your tablet with another device, they stay paired unless you unpair them.

1.Open the Settings screen.

2.Tap Wireless & networks → Bluetooth settings.

3.If Bluetooth is not turned on, check Bluetooth to turn it on.

Your tablet will scan for and display the Bluetooth names of all available Bluetooth devices in range.

4.If the device you want to pair with is not included in the list, make it discoverable. See the documentation that came with your device to learn how to make it discoverable by your tablet, and for other instructions for pairing.

5.If your tablet stops scanning before you make the other device discoverable, tap Scan for devices.

6.Tap on the Bluetooth name of the device in the list in settings to pair them.

The devices pair with each other. If you’re prompted to enter a passcode, try entering 0000 or 1234 (the most common passcodes), or consult the documentation that came with the device to learn its passcode. If the pairing is successful, your tablet connects to the device.

Connecting to a Bluetooth device

Once paired, you can connect to a Bluetooth device. For example, to switch devices or to reconnect after your TOSHIBA AT1S0 Tablet and this device come back into range.

1.Open the Settings screen.

2.Tap Wireless & networks → Bluetooth settings.

3.In the list of Bluetooth devices, tap a paired but unconnected device. If the device you expected isn’t displayed, tap Scan for devices. When your tablet and this device are connected, this device is shown as connected in the list.

Disconnecting from a Bluetooth device

1.Tap the device in the Bluetooth settings screen.

2.Tap OK to confirm that you want to disconnect.

Unpairing a Bluetooth device

You can unpair a Bluetooth device to erase all pairing information related to a specific device.

1.Press and hold the device in the Bluetooth settings screen.

2.Tap Unpair or Disconnect & unpair in the menu that opens.

User’s Manual

53