TOSHIBA AT300
1.Remove the slot cover and push the SIM card until you hear a click to partially release it.
2.Grasp it and pull it out of the slot.
USB device
This tablet is equipped with a Micro USB port supporting USB host function. This allows you to connect the following USB devices to the tablet: USB flash drives, USB HDDs (only FAT file system), USB Hubs powered by an AC adapter, game controllers, HIDs (Keyboards and Mouses) and other USB accessories for
To connect a USB device, you must purchase a Micro A plug - A receptacle cable. This item is available from your reseller or TOSHIBA dealer.
Make sure the connector is properly aligned with the socket. Do not try to force the connection, doing so can damage the connecting pins.
This tablet does not support a printer.
As the port operation of all USB devices has not been confirmed, some USB devices may not function properly.
HDMI device
The tablet is equipped with a Micro HDMI port that can send video by connecting with external devices. 1080p and 720p signal formats are supported, but actually available signal format depends on each HDMI device. Your tablet supports two output modes: Mirror & Video area only.
Mirror
The external display device copies the image on the tablet screen.
Video area only
The external display device shows the playback when you open a multimedia.
Please refer to Display section in "Settings" chapter for details. To connect external devices, follow the steps as detailed below:
As the port operation of all HDMI
1.Plug Type D connector of the HDMI cable into the Micro HDMI port on your tablet.
2.Plug the other end of the HDMI cable into the HDMI port of the HDMI device.
User's Manual |
