2. PRINTER SETUP EO1-33030
2.7 Loading the Media
2 -8
2.7.2 Loading the Cut Form 1. Place the paper top edge in front of the Media Inlet, and align the
left paper edge with the Paper Guide (L). Push the Paper Guide
Release Lever outside, and align the Paper Guide (R) with the right
paper edge.
2. Lock the Paper Guide by pulling the Paper Guide Release Lever up.
3. Turn the PC power ON, and then turn the printer power ON.
4. Insert the paper top edge into the Media Inlet until it stops.
5. Send a print data from the PC. The data is printed on the paper
Paper Guide (L)
Paper Guide (R)
Paper Guide
Release Lever
NOTE:
The AUTO FEED function is
available when selected by the
p
rinter setting and black marks
are printed on the media as
shown below. For details of the
p
rinter setting, please contact
y
our nearest TOSHIBA TEC
representative.
To activate the AUTO FEED
f
unction, insert the black mark
side of the media into the
M
edia Inlet until it stops. The
media will be automatically fe
d
to the print start position.
R
everse side of the media
Black Mark
Loc
k
Release