1. PRODUCT OVERVIEW EO1-33030
1.1 Introduction
1- 1
1. PRODUCT OVERVIEW
1.1 Introduction
1.2 Features
1.3 Unpacking
Thank you for choosing the TEC B-419 series label printer. This
Owner’s Manual contains information about general set-up through how
to confirm the printer’s operation using a test print. This manual should
be read carefully to help gain maximum performance and life from your
printer. For most queries please refer to this manual and keep it safe for
future reference. Please contact your TOSHIBA TEC representative for
further information concerning this manual.
The B-419 printer has the following features:
• The paper auto feed function is provided for the first time for a 4 inch
wide, small and light desk top printer.
• To meet various applications, four types of issue modes, such as, the
TEC Printer Command Language Light Edition (TPCL-LE) mode,
high speed graphic mode, label issue mode, and receipt issue mode,
are supported as standard.
For details, please inquire from your nearest TOSHIBA TEC
representative.
• This printer can print cut forms as standard, which allows ticket
issuing.
Unpack the printer as per the Unpacking Instructions supplied with the
printer.
NOTES:
1. Check for damage or
scratches on the printer.
However, please note that
TOSHIBA TEC shall have
no liability for any damage
of any kind sustained during
transportation of the
product.
2. Keep the cartons and
packaging for future
transportation of the
printer.