2. MAJOUR UNIT REPLACEMENT
2.5. REPLACING THE MEDIA SENSOR
2.5 REPLACING THE MEDIA SENSOR
2.5.1 Replacing the Sensor PCB (TR)
1)Push down the Head Release Lever R to open the Print Head Block. (Refer to Section 2.4)
2)Remove the Sensor Holder from the Sensor Holder Arm.
Sensor Holder Arm
Sensor Holder
3)Remove the Sensor Cover Sheet from the Sensor Holder.
Sensor Holder | Sensor Cover Sheet | Sensor Holder | Sensor Cover Sheet |
4)Release the Sensor Holder while spreading the tabs of the Sensor Holder. Be careful not to break the tabs when spreading them.
Tab
Fixed Portion | Sensor Holder |
|
2- 12
